There are running toilet ways to combat this water damage disaster. Let's talk about the four steps you can take, to prevent this from happening to you and your family.
Visually water line repair examine the frozen pipe for signs of damage including cracks holes or breaks. Begin your quest in the areas that are located closest to cold area such as the outer walls and crawl spaces. The holes can be as tiny as a pinprick, so inspect the pipe closely.
Another obvious indicator is if the water you get is close to cold as ice, then your water heating device has already reached its maximum level of service. If it can talk, it might have been shouting at the top of its voice telling you it needs replacement.
The next step in this process is to determine what type of method is available for fixing the problem. You cannot just caulk a crack or fill it in with cement and hope for the best. Unfortunately, there is more work than this because you have to fix the problem from both the inside out and the outside in. This takes a professional in most cases to determine the best method for repair.
Be certain that the bathroom exhaust fan vents to the outdoors, not into the house or attic. If the exterior vent dampers don't operate properly or water line repair don't seat well have them fixed or replaced.
If you do in fact choose to replace it, there is a good chance that you have an Aqua Magic IV which is no longer produced and has been replaced with the new Aqua Magic V. If you are replacing your toilet and have the Thetford Aqua Magic IV, there are other options such as the Thetford Aqua Magic Style Plus or Thetford Bravura Toilet as well as choices from the Sealand line of toilets. You will have to choose whether you want a hand or foot flush, and whether you want to stay with plastic or upgrade to china. You will also have the choice of adding a water saver. Regardless of which choice you make you will most likely be happy with the quality and dependability of any product available.
Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.